Ｍｏｄｅｌ：ＵＴＳ－Ⅲ
Ｓｍａｌｌ　Ｓｉｚｅ　Ｃｕｒｖｅ　Ｇｅｎｅｒａｔｏｒ　Ⅲ　Ｔｙｐｅ

【Specifications（50Hz）】

Item		Small size curve generator
Work spindle	Work dia.	Ø３～１０８㎜ (Special automatic chunk using 145mm)
	Speed	20　15　10　ｒ.ｐ.ｍ.
	Traverse	≒7０㎜
	Automatic chunk	for small size
Wheel spindle	Speed	ｒ.ｐ.m. 10,000 　　　8,000　　　6,000
	Before and behind	±４０mm
	Swivel angle	0°～５０°
Motor	Work spindle	200V　　　　　100W　　　　　4P　　　　　3相　　　　　1台
	Wheel spindle	200V　　　　　750W　　　　　2P　　　　　3相　　　　　1台
	Edge cutter	200V 　　　　 100W　　　　　2P　　　　　3相　　　　　1台
	Coolant pump	200V　　　　　　60W　　　　　2P　　　　　3相　　　　　1台
Size	Machine	W　1,000㎜　　　　　D　590㎜　　　　　H　1,300㎜
Size	Coolant tank	W　　400㎜　　　　　D　740㎜　　　　　H　1,300㎜
Weight	Machine	400ｋｇ
Weight	Coolant Tank 　(With pump)	25ｋｇ

Accesories	1）　Cuting oil tank with coolant pump	1set
	2）　Diamond wheel loosening pin	1pc.
	3）　Hexagonal handle, L and S	4pcs.
	4）　Hexagonal handle with bar 5 mm	1pc.
	5）　Lens basket	1pc.
	6）　Lens chuck tightening cover	3pcs.
	7）　Spanner, 10㎜ and 17㎜	1pc. each

Specification will be changed for improvement without notice.

【Feature】

1)　Ｔｈｅ machine is rigid horizontal structure for high accuracy and easy Operation, and to
　　secure warrantable grinding work with adopting pressurized grinding method by spring
　　and weight.

2)　There are two tyoe,small size and medium size. The medium size type is reinforced on
　　grinding wheel spindle.

3)　The work is loaded certainly by automatic chuck to gind accurately without the
　　dispersion and disproportion of work thickness.

4)　Compensation device for accuracy of spherical surface is easy to control.

5)　The finish of work cycle is indicated by red lamp and buzzer with setting timer.

6)　UE1-B and UE1-C chamfer attachments are installed on the mashine on request.

7)　coolant tank with casters is easy to handle

Return